contact us

Extractor Dryers

 

Extractor/Dryer®

The patented Extractor/Dryer® is a two-stage, point-of-use compressed air filter. Designed primarily for the final usage of air, it will remove water, oil and other contaminates from compressed air lines. The Extractor/Dryer was developed for air driven tools, paint spraying, manufacturing equipment or any other compressed air equipment to produce clean, dry compressed air. In return you receive extended equipment life, improved product quality, reduced downtime, and savings on costly repairs to damaged equipment. These advantages will pay for themselves in a short amount of time.


Standard Features include:

  • Differential Pressure Gauge (All models except 520's and 195A) - Allows the user to visually see the change from green to red, indicating a pressure drop of 10 PSI or greater you will need to service the elements. Service Kits available for all models
  • Weep Drain - Allows minimal, continuous flow of contaminated air to escape the base of the unit.
  • Mounting Brackets (All models except 520's and 195A) - Allows for easy and protective mounting of your Extractor/Dryer.

Point-of-Use:                  

La-Man® takes a different approach to cleaning up contaminated compressed air lines. Our Extractor/Dryer provides the best service when it is located at the point-of-use in an application. This allows the air from the compressor to cool, thus condensing to liquid and enabling the Extractor/Dryer to remove moisture from compressed air lines. The shortest distance from our filter to the point-of-use ensures cleaner air, therefore protecting valuable machinery and equipment.

Please contact us for more information.


         110F                       120                             520BC

Additional Features- Benefits

  • Models range from 15 SCFM thru 2,000 SCFM
  • Standard 5 micron ratings (lower micron rating available)
  • Removes 99.9% of the liquids entering the Extractor/Dryer
  • Easy to install and maintain without removal from air line
  • Lightweight aluminum housing
  • Immediate cost savings from decreased downtime 
  • Standard inlet and outlet NPT sizes
  • Improve equipment performance and product quality 
  • Standard Differential Pressure Gauge for rust and dirt particles

Additional options available: float drain, regulator and electronic drain.

 

 

 

How it Works: 

Compressed air containing tiny particles of dirt, dust, oil and moisture enters the first stage of the Extractor/Dryer®.
A coalescing effect occurs as air passes through a cartridge mesh filter that captures particles and causes moisture to form larger droplets. 
Air velocity lessens as it enters the extraction chamber allowing particles to collect and moisture to condense on the honeycomb. 
Particle laden water flows along the bottom and out the drain. 
Air passes through the second stage, wire supported fiber, filter cartridge that captures remaining particles down to 5 micron.
Remaining moisture and contaminates are dried and filtered in the second stage filter.
Exhaust air is clean and dry - no dirt, rust, oil or water droplets to disrupt air equipment operation.

To see the Extractor/Dryer® in actionClick here to link to video.

 

 

MODELS

NPT

SCFM

MAX PSI

SERVICE KIT

   SIZE (INCHES)   

APPROX WT. LBS

520A Top port        

1/4”

15

250

015SK

7-1/8 x 3 x 1-1/4

2#

520B Side Port

1/4”

15

250

015SK

8-1/4 x 3 x 1-3/4

2#

105

1/4”

50

250

050SKA

8-1/4 x 4 x 2-1/2

3#

106

3/8”

50

250

050SKA

8-1/4 x 4 x 2-1/2

3#

107

1/2”

50

250

050SKA

8-1/4 x 4 x 2-1/2

3#

110

1/2”

80

250

080SKA

11-3/4 x 6 x 3-1/4

6#

111

3/4”

80

250

080SKA

11-3/4 x 6 x 3-1/4

6#

120

1”

150

250

150SKA

15 x 9-1/2 x 5-1/2

15#

140

1-1/2”

250

250

250SKA

20 x 12-1/2 x 7-1/4

36#

180

2”

500

150

500SKA

27 x 18 x 9-3/4

70#

The models listed above are 5 micron, for smaller micron Extractor/Dryers options please contact us.

facebook
 
Made In America
Made in America